Rockford Fosgate 1000 Watt Mono Element Ready Amplifier IPX6 Motorcycle UTV

Description

Product Description:
Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.
Element Ready™ with integrated harnesses for a watertight seal
PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
Play all day, easy to integrate, and keep music playing for extended lengths of time
C.L.E.A.N. input/output clip detection and indicator LEDs
Constant Power provides instantaneous delivery of output over varying impedance loads
Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
Top mounted control panel with waterproof smoked lens
OEM and aftermarket radio integration inputs
Low Impedance Stability
Proprietary testing using RATS (Rockford Automated Testing System)
Class-BD technology provides 75-80% efficiency over traditional class A/B designs
Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
Balanced Differential Inputs eliminates noise picked up by signal cables
Remote-Out feature when using high level inputs
2-Year Warranty
CEA-2006 Compliant
Yes
Number Of Channels
Total Power
(Sum of Rated Power)
1000 Watts
Rated Power
(RMS Continuous Power)
CTA-2006 Continuous Power Rating
500 Watts x 1 @ 4Ω
750 Watts x 1 @ 2Ω
750 Watts x 1 @ 1Ω
≤0.1% THD+N
Dynamic Power
(PVC/PowerCube®)
CTA-2006 Dynamic Power Rating
525 Watts x 1 @ 4Ω
900 Watts x 1 @ 2Ω
1000 Watts x 1 @ 1Ω
Bridgeable
No
Frequency Response
30 Hz - 245 Hz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-BD
Efficiency
(average)
>80%
Total Harmonic Distortion
(THD+Noise)
4Ω: <1.0% (CTA-2006)
2Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output
-
Tone Controls
+18 dB @ 45 Hz
Crossover Controls
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic: 30 Hz @ 12dB/Octave Butterworth
Remote Controls
No
Visual Indicators
Power: Blue
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Power Wire Gauge
8 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
16 AWG
Speaker Output Connector
4-pin Molex to tinned bare wire
Cooling
Convection
Heatsink
Die Cast Aluminum
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
120 A
Average Current Draw
(13.8V Music)
45 A
Max. Current Draw
(13.8V Sinewave)
45 A @ 4Ω
75 A @ 2Ω
100 A @ 4Ω Bridged
Suggested Alternator
Dimensional Diagram
Dimensions
(H x W x D)
1.7" x 4.25" x 8.41"
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses
Shipping Weight
TBA
Item Fitment:
Universal
Part Number:
RF-M5-1000X1
Retail: 499.99
Sales Tax:
Please reference the EBay Tax Table for all tax calculations
Customer Service:
Here at Eastern Performance Cycles we look forward to helping you with any questions or concerns during your purchase.
Hours: Mon- 8am to 5pm / Tues-Fri 8am to 5:30 pm EST
Tracking Numbers will be given during business hours listed above
Damages & Warranty
Before you unwrap your parts double check your fitment and once unwrapped, look the item over before trying to install it. We want every customer to be 100% satisfied with their purchase and know that all parts are fully warranted by the manufacturer.
Damages & Warranties
Damaged Shipments:
Do not accept delivery from the carrier if the box has been damaged. If you can snap a picture of the damage and notify us ASAP we can replace the order right away. If you find shipping damage while opening your package be sure to keep all packing material and the shipping box so we can open a claim for you. Notify us right away so we start the process.
Missing Items or Wrong Item Received:
Keep the box, packing material, all shipped parts and contact us right away.
Warranties:
All products are warranted against manufacturer’s defects. Increasingly, many of our manufacturers handle claims directly to speed up the process of exchange or sending replacement parts. We’re happy to step in and get the ball rolling. Electronic parts must go back to the manufacturer for bench testing. Because issues are often solved over the phone with tech support, call the manufacturer first and be sure to get the name of whoever you speak with if you need to contact us.
Resolution Process:
Business hours (8:00-5:00 pm EST) will get the resolution process going right away. After hours please email us so we know first thing in the morning there is a problem and we will contact you promptly.
Shipping:
Free Shipping:
applies to the lower 48 United States only.  Canada, Alaska, Hawaii, APO’s and Puerto Rico are not part of the lower 48 states and will be invoiced separately for shipping.
Most items will ship same day as long as the payment is received by
2 PM EST
. Otherwise the item will ship next day or in accordance with the handling time. Handling times do not include weekends or holidays.
Be aware of handling times prior to purchase. While most items ship out the same day this might not always be the case. Expedited shipping is available but must be arranged prior to shipment.
Shipping method will either be USPS or UPS and it is determined by Eastern Performance's customer service team based on the best price with the safe arrival of the package in mind.
Make sure your Paypal confirmed address is up to date prior to purchase. For the protection of buyers and sellers we cannot make any changes after purchase.
If an item is out of stock or oversold, buyers will be notified immediately and refunded for the item. An estimated restock date will be provided at the time of cancellation.
International Custom's Fees and Taxes are paid by the receiver and Eastern Performance will not be able to modify the listed value of the item to avoid these fees. Please contact your local government for the cost of these fees.