Olson scroll saw blades 4 inch MS51-01 MS52-01 MS53-01 for Dremel Moto-Saw MS20

Description

This listing is for one lot of
TWELVE
new highest quality high carbon steel
4 inch (105 mm) pinned
scroll saw blades.
Increasing
discounts
for two, three and four or more sets!
Free shipping
in USA!  Shipping charge on the first set only internationally,
no additional shi
pping charge
for
more than one set!
The
picture shows the blades laid out for illustration, they
will be shipped loose in secure packaging.
These blades are made in USA by The Olson Saw Company and distributed by ZimbyoProducts.
These blades are designed for cutting wood, plastic and thin non-ferrous metals (copper, zinc, brass, lead and aluminum).
These blades fit the new Dremel Moto-Saw
MS20 or MS20-01 2 in 1 which
uses pinned blades 4.13 inch (105 mm) total length, 3.94 inch (100 mm) between pins.
Please note these blades do not fit the old Dremel Moto-Saw that uses 3 inch blades.
You can specify
any combination
of fine, medium and coarse grades. Please specify the grades you want by separate email. If you do not specify, we will assume you want our
standard selection
which is 4 fine, 4 medium and 4 coarse blades as shown in the picture.
The
fine
blades
(similar to Dremel MS53-01)
have
25 regular teeth per inch, 0.010 inch thickness and 0.074 inch width for extra smooth finish cutting, extra sharp turns, and for fine work.
The
medium
blades (similar to Dremel MS52-01) have 18 skip teeth per inch, 0.010 inch thickness and 0.074 inch width for smooth finish cutting, and sharp turns.
The
coarse
blades
(similar to Dremel MS51-01)
have 15 skip teeth per inch, 0.018 inch thickness and 0.094 inch width for fast smooth cutting, and medium turns.