12V MOMENTARY 2 channels 12Vout DC contact relay remote control A B switch RM22

Description

RM22
TWO CHANNELS
12V Universal Remote Control Switch
with
MOMENTARY REMOTE CONTACT
Momentary mode:  press and hold remote button to close contact, release remote button to open relay contact
Kit includes
2
receivers and
2
remote control
transmitters
Features:
-Remotely turn On and Off for any 12 Volt DC devices such as computer lighting & accessories, auto lighting kits, landscaping lighting, boat lighting or other electronic applications.
-Compact size and mounting holes make it easier for installation.
Specs:
Input voltage: DC 12V
Operating Bandwidth: 315MHZ
Receiver standby Current: ~4.5mA
Operating voltage: 12Vdc
Relay max. Output : 15A
Dimension: 1.75" x 1.75" x 1"  (4.45cmX4.45cmX2.54cm)
Remote: 2 buttons, with A and B channel assigned. press and hold each channel button to activate, release to deactivate.
Remote range ~80ft (~20m) range and signal strength depend on where device is setup, battery strength, RF or motor noise interference, etc...
Remote Dimension: 1.25" x 2" x 0.5"
Wire layout:
Red wire: 12vdc positive power input
Black wire x2: for ground or negative connection for both input power and output device
Blue wire: Antenna, no connection required
White wire: 12Vdc positive power output when receiver box is turn on
**Caution! Do not connect directly to any 120/240VAC power without using a12V AC/DC converter or adapter.